Sentry CR105 Manual download pdf (Page 14)

U7698E Flame Detector

Part 334614E

E 2002 Nordson Corporation

Manual 34-49

Pneumatic Connections

See Figure 4.

Install a 0.7-bar (10-psi) fixed-pressure regulator for each detector head.

1. Install the regulator(s) (4) on the booth as close as practical to the

detector head (2).

2. Install 6-mm air tubing (5) between the regulator input port(s) and the

system air supply.

3. Install 6-mm air tubing (3) between the regulator output port(s) and the

air shield input port(s).

1400495A

Figure 4 Detector Head Pneumatic Connections

1. Vestibule

2. Detector head

3. 6-mm air tubing to air shield

4. Regulator

5. 6-mm air tubing to system air

supply

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

No comments

Sentry CR105 Manual Page 14